Mounting on a mini 1380

Public Forums Started by bcirilo 2018-05-13 16:56:46 +02:00 Comments: 3 Viewed: 7479

bcirilo Member

Hello, I have a 123ignition USB and the electric information that is in the instructions has a yellow wire. Can you please tell me here does it have to be wired or connected? I have managed to start the car without the yellow wire being connected to any part of the car. Can anyone help me please? By the way, I don't have a curve for the car... Can anyone help me share a curve so I can see the values? Thanks everyone, Bruno

bcirilo, 2018-05-10 07:27:16 +02:00

#1047
Leen APK Administrator Staff Member

Hello, As stated in the manuel, the yellow wire is to select curve 1 ro 2. When not connected curve 1 is selected, when connected to 12 volt curve 2 is selected. The advance curve should be found in the lucas date with the original distributor number. Or, determind by test and adjust as stated in the instalation manuel. Best regards, Leen

Leen APK, 2018-05-10 10:22:07 +02:00

#1049
bcirilo Member

Thank you very much Leen. Is there some one that can send me a curve for a Mini 1380cc with a Swiftune SW5, Flat Top Omega Forged Pistons, big valves, doble springs on the rocker assembly 1.5 ratio. Can some one help me creat a good and solid curve? Thanks, bruno

bcirilo, 2018-05-13 16:56:46 +02:00

#1052

(You must log in or sign up to post here)

Identificarte | Registrate
Reglas del foro!
Ayuda!