Hi all,
i buyed the new 123 Ignition tune+.
Now i want to change my old 123 for the 123+, but i dont have a working app.
My IPad is generation2 (so no Bluetooth 4.0) and for my Androids there is no app.
When will come a android App ?
Thomas
The Android App for the TUNE+ will be available some time this year; we do hope it will be sooner then later as we do not have any iOS devices ourselves.
Best regards,
Heidi,
123ignitionshop.com
I ordered a 1213/Tune+ (bluetooth)
Tune+ Renault for my R-Quatre 1108cc 1985.
Need Android app, will have to borow an iPhone.
Is there a windows bluetooth app for windows 10 on a laptop?
Greetz,
Johan
PS: waiting for my 1213/Tune+ (bluetooth)
123/Tune + was in ongeveer 45 min geïnstalleerd op mijn R4, met nieuwe bobine en bougiekabels. Afstellen ontstekingstijdstip met stroboscooplamp ging redelijk, was lang geleden. Carburatie afgesteld op gehoor en proefritten. Motor loopt heel soepel maar houd soms een heel klein beetje in bij rijden aan vaste snelheid. Ik denk dat het mengsel iets rijker mag zijn. Kan spijtig genoeg enkel door iets grotere sproeier te steken en die zijn niet verkrijgbaar (moet je dus zelf maken). De vast ingestelde curve in de 123 werkt goed, maar ik zou deze graag kunnen aanpassen. Dus ikke wacht vol ongeduld op de Android app. Ben wel 150% tevreden over 123ignition. Ik wil haar (R4 GTL) motormanagement kunnen volgen tijdens het rijden. Haar specificaties; 1985, 688 D7 12, 1108 cc, 34 Pk bij 4000 t/min, Compressie 9,5, carburator Zenith 28IF, ... Wie weet ooit een 123 injectie.
Hallo!!
I am very interested in purchasing an 123tune+ for a 2cv.
My devices are android. Will eventually be an Android app?. Should I wait a little more?
Bedankt
De Android App heeft helaas enige vertraging opgelopen. Deze is zeer waarschijnlijk eind oktober te vinden in de App store.
Unfortunately the Android App has been a bit delayed. We hope the manufacturer will have it ready in the App store at the end of October.
Does android app still planned for en of october?
More or less 6 Month that i have the hardware without software. :(.
Hope that Android app will ne available end of octobre as planned today.
Halo,
I have just installed the 123tune + in my 2cv.
My engine is A06/635.
Since the installation instructions that came in the box were generic I installed the ignition module following the Evo manual.
When the Bluetooth communication is stablished in the tuning tab an advance curve appears.
Is this curve valid for all type of engines?
From the EVO manual I read this data:
25°/3000 curve ‘C’ for A79/1, M28 & M28/1
I added 3000rpm/25cfnksatf degrees point to the curve.
How should I add the Static TIMING 8° for M28 & M28/1 to the CURVE?
Where can I get curves for the A06/635 engine?
Thanks in advance,
Edu
Halo edo,
since the timing pin on rthe flywheel is set at 8 degrees you do not have to ad another 8 degrees to the curve.
For this engine staart the advance ad 900 rpm and go in a straight line to 25 degrees ad 3000 rpm. From 3000 rpm and up keep it on 25 degrees. This is a good starting poit en start fine tunnig from this curve.
Best regards, Leen
PS, the preprogrammed vacuum curve is usualy verry good
Hi,
I get the following message on my Android phone, downloading the 123/tune dashboard app from the app store :
Your device is not compatible with this version.
My Android version is 4.2.2.
How to solve this ?
